Statutory Signage

Statutory are required to be installed on commercial, retail and residential developments in accordance with the Building Code of Australia (BCA).  

This Signage requires fire services signage, Electrical Signs, Gas/water meter signs, danger signage,  toilet signage, braille signage and more within a particular building or development.

At Digicraft Design we have years of experience in statutory signage to suit your budget. From Allupanel with Vinyl lettering to Stainless Steel Engraved  and Braille signs. All designed according to regulations letter Height, colours an installed at correct viewing heights.

At Digicraft We understand the importance of these signs to the approval of construction site, we make and stock standard signs and  can make all our vinyl lettering signs within 24 hours or even 1 hours for urgent orders.

*** Can't find what you are looking for. All our signs can be custom made to your requirements.

Hydrant Pump

Hydrant Pump

Hydrant Pump 400mm x 100mm

View details
Access to Pump Room

Access to Pump Room

Access to Pump Room 400mm x 100mm

View details
Attack Hydrant

Attack Hydrant

Attack Hydrant 400mm x 75mm

View details
Block Plans

Block Plans

Fire Alarm Block Plans

Also known as zone block plans, these are required to be installed adjacent to fire indicator panels, FIP and MIMIC panels. This must also show the location of the FIP as well and the area of each fire alarm zone marked.

Evacuation Diagrams

These diagrams are REQUIRED in all buildings, structures and workplace that are, or may be occupied by people. All fire-fighting equipment must be marked along with their locations in red, and designated exits must be marked in green. Each diagram will be valid for 5 years.

Hydrant Block Plans

Hydrant block plans are located within the booster, fire control room and pump room and must me water and fade resistant. Each fire hydrant, stop valve and any other fire related equipment must be clearly marked on a A3 size (Minimum)

Sprinkler Block Plans

Sprinkler block plans are located at each of the set of installation control assemblies, these must be water-resistant and fade-resistant. This should include the layout of the protected areas where the main stop valve are located.

Tactical Fire Plans

These are building/site plans that are installed within the fire control room or fire control centre, these show the location of fire safety equipment and services

View details
Boost Pressure 700 kPa

Boost Pressure 700 kPa

Boost Pressure 700 kPa 450mm x 100mm

View details
Boost Pressure 750 kPa

Boost Pressure 750 kPa

Boost Pressure 750 kPa 450mm x 100mm

View details
Combined Hydrant & Sprinkler

Combined Hydrant & Sprinkler

Combined Hydrant & Sprinkler Stop Valve Inside 550mm x 200mm

View details
FH (Fire Hydrant)

FH (Fire Hydrant)

Fire Hydrant (FH) 120mm x 120mm

View details
Fire Attenuation Screen

Fire Attenuation Screen

Fire Attenuation Screen 120mm x 12mm

View details
Fire Control Room

Fire Control Room

Fire Control Room 550mm x 150mm

View details
Fire Egress Path No Storage Permitted

Fire Egress Path No Storage Permitted

Fire Egress Path No Storage Permitted 550mm x 100mm

View details
Fire Evacuation Diagram

Fire Evacuation Diagram

Guides on using Evacuation Diagrams

Location

This is determined by the Emergency Planning Committee (EPC), these must be displayed in locations that are easily viewed by occupants and visitors. The quantity will vary depending on building class, number off occupants, visitors and many more.

Position

The height must not be less than 1200mm and not more than 1600mm from the floor level.

Orientation

As per AS 3745 Evacuation Diagrams, the orientation will depend on the location it will be installed on. The site plant showing the assembly point and the floor plan must be oriented according the the 'You Are Here' location.

Australian Standard Requirements For Evacuation Diagrams

  • You Are Here symbol
  • Designated exit points and evacuation paths - Fire extinguishers and types
  • Fire blankets
  • Validity Date (this is slightly different for Queensland)
  • A symbol legend
  • Location of the workplace & site address/facility name if applicable
  • “EVACUATION DIAGRAM” heading
  • Assembly point location either written or in a picture

Optional Elements

  • First aid kits & Defibrillators
  • North direction
  • Emergency Information –in accordance with your Evacuation Plan
  • Spill response kits
  • Direction of door openings for emergency doors
  • Electrical switchboards
  • Fire hydrants
View details